High-pressure fire pump gasoline Taian new machine Caution: The new pump after the run after run (first 20 hours), must replace the oil lubricants; after 50 hours required to perform the following: 1. Replace the engine oil; 2, replacement or Wash the filter cartridge lubricants; after every 100 hours to replace a lubricating oil; new pumps should avoid sudden increase in load or high-speed operation; use the same brand of lubricants, lubricating oil do not mix different brands of used lubricating oils containing various additives, lubricants after mixing different brands of lubrication performance will decline, resulting in abnormal wear of moving parts. When the fuel tank to the fuel injection, you should turn off the machine, the filler should screen filter; pump long-term use should be placed close petrol switch, and rest assured that the remaining gasoline in the carburetor, unscrew the pump discharge drainage plug at the bottom water and sediment. Diesel fuel priming pump high-pressure diesel fire pump sewage pump sewage pump petrol 1.5 petrol high-pressure fire pump parameters: KZ15HP 1.5-inch high-pressure fire pump gasoline import and export unit model KZ15HP diameter mm (inch) 40 (1.5 ") Rated flow (m3 / h) 25 Maximum lift (m) 55 self-absorption time (s / 4m) 80 Maximum suction lift (m) 8 speed (rpm) 3600 Fuel Consumption Rate (g / KW × h) ≤395 Dimensions (mm) 515 × 395 × 445 Weight (kg) 23 Engine Model KZ168F engine maximum power KW 4.8 Fuel tank capacity (L) 3.6 Displacement (cc) 196 self-priming high-pressure diesel fire pump diesel gasoline pump sewage pump sewage periodic servicing and maintenance is planned to extend engine life key, maintenance cycle and maintenance projects to make depending on the application, usage and fuel, lubricating oil traits appropriate adjustments. fair use, attention maintenance, prevent early wear and prolong its life, let it keep rapid startup and investment Good preparation machine status, truly the best use.